WingWing Z84

© Mark Qvale - January, 2018

	700px
	New (tiny) wing!

Introduction

I decided to try something much smaller in the Wing world. The Z84 is a smaller version of the C1 and FX-61 and I am hoping it flys well as I want to take it backpacking! For flight management/control I'll be starting with an Omnibus F3Pro flight controller to keep it light and simple.

Here then is a collection of my build notes and eventually a flight review of this plane.

General Specifications

Distributor - ReadyMadeRC, USA
Aircraft - Strix Stratosurfer
Build Date - January, 2018
Update - 5 February, 2018

Airframe Type -	Top Wing FPV Specialist		All-Up Weight -	59oz (1670g) w/ 4S/7000 Li-ion Pack
Wingspan -	59 inches (1500mm)			56oz (1676g) w/ 4S/5200 Li-Poly Pack
Length -	39 inches (1000mm)		COG -	65mm - 70mm @ Wing root (Stock)
Wing Area -	2.95 ft^2 (27.4dm^2)		Wing Load w/5200mAh/4S -	19.7 oz/ft^2 (61g/dm^2)
Motor -	Cobra C2217/16-1180kv		Max Continuous Power (4S) -	360 watts (4S)
Propeller -	8x7 Aeronaut Cam Carbon Folder		Max Prop Power -	358 watts @ 2550ft ASL
Static Thrust & Prop Speed -	1245g & 88mph @ 2550ft ASL		Static Thrust/Weight -	0.75
Battery Type -	4S1P Lipo -or- 4S2P Li-ion		Battery Capacity -	5200mAh/10C or 7000mah/3C
In flight efficiency -	<135mAh/mile (<84mAh/km) Typ.		Flight Time -	80 min

Components/Flight Gear

Below is the approximate layout of installed components:

TBA

Power Set-up

For power on this build I will start with a Multistar Elite 2204-2300kv motor and a HobbyKing Blue Series 20A with a single Low ESR capacitor added.

• Motor - Multistar Elite 2204-2300kv
• ESC - Blue Series 20A
• Prop - HQ6x4.5
• Battery - Li-ion 3S/3500