Parts Catalog - General Parts
This page or section is under construction and will change going forward.
Questions or Comments? Please contact the Wiki administrator |
Introduction
Like the Mini Talon Parts Compilation Page, this is a collection of 3D print parts. The parts on this page are more general in nature which means they can be used on different airframes and applications. These have all been printed and tested.
Many of the parts found here are also on my Thingiverse pages although since all parts are published here first, this is where you will find the most current versions. As on Thingiverse, everything found here is protected by Copyright and licensed under the terms of the Creative Commons "Attribution-NonCommercial-ShareAlike 4.0 International" license.
General Parts
Aeronaut Prop Parts
Image | Part Number | Part Description | Weight | Print File | Drawing | Compatibility |
10001 | Prop Stop Insert 38mm x 5mm | 6g | 10001.STL | 10001_Sketch | Fits all Aeronaut 38mm Yokes. | |
10002 | Prop Stop Insert 38mm x 6mm | 6g | 10002.STL | 10002_Sketch | Fits all Aeronaut 38mm Yokes. | |
10003 | Prop Stop Insert 38mm x 8mm | 6g | 10003.STL | 10003_Sketch | Fits all Aeronaut 38mm Yokes. | |
10004 | Prop Stop Insert 42mm x 5mm | 7g | 10004.STL | 10004_Sketch | Fits all Aeronaut 42mm Yokes. | |
10005 | Prop Stop Insert 42mm x 5mm | 7g | 10005.STL | 10005_Sketch | Fits all Aeronaut 42mm Yokes. | |
10006 | Prop Stop Insert 42mm x 5mm | 7g | 10006.STL | 10006_Sketch | Fits all Aeronaut 42mm Yokes. | |
10011 | Prop Stop Insert 35mm x 5mm | 7g | 10011.STL | 10011_Sketch | Fits HobbyKing 35mm Yokes. |
Antenna SMA Flare Nut Wrench
Image | Part Number | Part Description | Weight | Print File | Drawing | Compatibility |
10012 | Antenna SMA flare nut wrench | 5g | 10012.STL | 10012_Sketch | Thumb wrench for SMA connectors. |
Battery Strap Guides
Image | Part Number | Part Description | Weight | Print File | Drawing | Compatibility |
10015 | Battery Strap Guide 35mm | 5g | 10015.STL | 10015_Sketch | Flat, external battery strap guide | |
10016 | Battery Strap Guide 40mm | 5g | 10016.STL | 10016_Sketch | Flat, external battery strap guide, 40mm wide | |
10017 | Battery Strap Guide 50mm | 5g | 10017.STL | 10017_Sketch | Flat, external battery strap guide, 50mm wide |
DragonLink Parts
MicroRX Saddle Mounts
Image | Part Number | Part Description | Weight | Print File | Drawing | Compatibility |
47016 | DragonLink MicroRX Mount | 5g | 47016.STL | 47016_Sketch | DragonLink MicroRX Mount for v2 RX | |
47017 | DragonLink MicroRX v3 Mount | 5g | 47017.STL | 47017_Sketch | DragonLink MicroRX Mount for v3 RX |
RX Dipole Antenna Mount
Image | Part Number | Part Description | Weight | Print File | Drawing | Compatibility |
52040 | DragonLink 433 Antenna Mount LT | 5g | 52040.STL | 52040_Sketch | DragonLink 433 Antenna Mount left half | |
52041 | DragonLink 433 Antenna Mount RT | 5g | 52041.STL | 52041_Sketch | DragonLink 433 Antenna Mount right half |
NACA Style Ducts
Straight Ducts
Image | Part Number | Part Description | Weight | Print File | Drawing | Compatibility |
52120 | NACA Duct, 22mm, straight | 5g | 52120.STL | 52120_Sketch | General NACA Duct with a 22mm opening | |
52121 | NACA Duct, 32mm, straight | 5g | 52121.STL | 52121_Sketch | General NACA Duct with a 32mm opening |
Curved Ducts
Image | Part Number | Part Description | Weight | Print File | Drawing | Compatibility |
52122 | NACA Duct, 22mm, Curved | 5g | 52122.STL | 52122_Sketch | Fits a slightly curved surface | |
52123 | NACA Duct, 32mm, curved | 5g | 52123.STL | 52123_Sketch | Fits a slightly curved surface | |
52125 | NACA Duct, 20mm, curved | 5g | 52125.STL | 52125_Sketch | Fits a slightly curved surface |
Specific Airframes
Image | Part Number | Part Description | Weight | Print File | Drawing | Compatibility |
52119 | NACA Duct FX-61 | 5g | 52119.STL | 52119_Sketch | These ducts fit over the bottom finger holes in the FX-61 | |
52124 | NACA Duct, Nano-Talon Hatch | 5g | 52124.STL | 52124_Sketch | Replaces the lame NACA duct on the Nano Talon | |
52126 | NACA Duct, Mini Talon Hatch | 5g | 52126.STL | 52126_Sketch | Fits the Mini Talon hatch |
Servo Buss
Mounted in one of my Mini Talons |
Image | Part Number | Part Description | Weight | Print File | Drawing | Compatibility |
52130 | Servo Buss, 6 pin | 2g | 52130.STL | 52130_Sketch | Small servo buss holder | |
52131 | Gusett, servo buss | 2g | 52131.STL | 52131_Sketch | Servo buss support gusett |