Pan and Tilt Parts

This page or section is under construction and will change going forward.

Questions or Comments? Please contact the Wiki administrator

October 2017

Contents 1 Introduction 1.1 Project Pages 2 Print Parts 2.1 Yaw Brackets 2.2 Camera Plates 2.3 Servo Plates 2.4 Assembly Parts 3 Typical Assemblies 3.1 Simple Pan and Tilt 3.2 Heavy Duty Pan and Tilt 4 See Also

Introduction

This catalog of parts is a compilation of 3D printed parts that can be combined to make many versions of my Pan and Tilts. There are notes on compatibility and some pieces with sketches or more information.

Project Pages

You can check these pages for more information on some of my builds.

In this Wiki

Thingiverse

Print Parts

Yaw Brackets

Image	Part Number	Part Description	Print File	Drawing	Compatibility
	52092	Lower bracket, small	52092.STL	52092_Sketch	Supports all Camera Plates. See part sketch for mount hole spacing.
	52093	Lower bracket, medium	52093.STL	52092_Sketch	Supports all Camera Plates. See part sketch for mount hole spacing.
	52094	Lower bracket, large	52094.STL	52092_Sketch	Supports all Camera Plates. See part sketch for mount hole spacing.

Camera Plates

Image	Part Number	Part Description	Print File	Drawing	Compatibility
	52062	Camera plate, RunCam Split	52062.STL	52062_Sketch	Fits all Yaw Brackets. Designed for the RunCam Split camera
	52089	Camera plate, HS1177	52089.STL	52089_Sketch	Fits all Yaw Brackets. Designed for the HS1177, 26mm x 26mm camera
	52090	Camera plate, RunCam Eagle v1	52090.STL	52090_Sketch	Fits all Yaw Brackets. Designed for the RunCam Eagle v1 camera
	52091	Camera plate, RunCam Eagle v2	52091.STL	52091_Sketch	Fits all Yaw Brackets. Designed for the RunCam eagle v2 camera
	52095	Camera plate, standard	52095.STL	52095_Sketch	Fits all Yaw Brackets. Simple HD camera platform for Runcam2, Mobius, Foxeer Legend, etc.
	52096	Camera plate, 18mm mini	52096.STL	52096_Sketch	Fits all Yaw Brackets. Designed to fit mini FPV cam by Eachine, etc.
	52097	Camera plate, 21mm mini	52097.STL	52097_Sketch	Fits all Yaw Brackets. Designed to fit mini FPV cam by FatShark, etc.

Servo Plates

Image	Part Number	Part Description	Print File	Drawing	Compatibility
	52063	Servo plate, geared, raised	52063.STL	52063_Sketch	Fits Turnigy RS5180MG servo or similar.
	52098	Servo plate, geared, flat	52098.STL	52098_Sketch	Fits Turnigy RS5180MG servo or similar.
	52099	Servo plate, angled	52099.STL	52099_Sketch	Fits Turnigy RS5180MG servo or similar. Servo only, no gearing.
	52100	Servo plate, flat, raised	52100.STL	52100_Sketch	Fits Turnigy RS5180MG servo or similar. Servo only, no gearing.
	52111	Servo plate, HD PnT, large	52111.STL	52111_Sketch	Fits GWS S125-1T 360 deg servo or similar.
	52112	Servo plate, HD PnT, small	52112.STL	52112_Sketch	Fits GWS S125-1T 360 deg servo or similar.
	52116	Deck plate, HD PnT	52116.STL	52116_Sketch	Replaces the bearing plate on the HD set-up. Allows a clean deck mount with the servo below.

Assembly Parts

Image	Part Number	Part Description	Print File	Drawing	Compatibility
	2205	Bearing plate, HD-PnT	2205.STL	2205_Sketch	Carries and supports the 0.375"ID x 0.625"OD x 0.156"T bearing.
	52064	Light weight PnT deck spacer, 5mm	52064.STL	52064_Sketch	Supports all non-HD servo plates.
	52080	Pan turret, HD-PnT, short	52080.STL	52080_Sketch	Creates a simple Pan only on the HD unit.
	52082	Servo coupler, HD-PnT	52082.STL	52082_Sketch	Connects GWS servo to Yaw plate assembly or simple cam plate.
	52109	Upper yaw bracket coupler	52109.STL	52109_Sketch	Attaches to 52094, Yaw bracket to make assembly.
	52113	Cam plate, geared PnT, 4 degree	52113.STL	52113_Sketch	Replaces tilt parts on geared PnT. Makes a "Pan only" set-up.
	52114	Pinion gear mount, geared PnT	52114.STL	52114_Sketch	Main component of geared pinion assembly.
	52115	Pan turret, HD-PnT, tall, 4 degree	52115.STL	52115_Sketch	Creates a simple Pan only camera deck on the HD unit. This deck is angled to 4 degrees.