Mini Talon Noses2

March, 2017

Introduction

This article is my final on the subject of the Mini Talon front canopy. I have redone the feature set that makes up this 3D model smoothing out the surface and profile and changing the NACA style vent to side air scoop type vents. It prints more cleanly now and I have added a version which will support either the Geared Pan & Tilt or the 390deg Pan & Tilt. Below you will find the latest versions of this fun design with downloads for all the printable STL files.

Plain Canopy

If you want to simply cover the nose for a more appealing look or need something to fit to your own structure this may be the part you want.

Part Number	Part Description	Weight	Print File
47001	Canopy, Plain	29g	47001.STL
47002	Canopy, Plain, FPV Cut-out	29g	47002.STL
52001	Canopy support, front	9g	52001.STL
52002	Canopy support, rear	4g	52002.STL

Install

Use E6000, Beacons FoamTac or UHU-POR glue to fasten in place.

Print Recomendations

ABS is recommended for this part. It will fit and work fine on 0.2mm resolution and slow to moderate print speed.

Static Canopy for HD Cameras

This version has a cut-out and platform for the Mobius style HD cams and is the most aerodynamic of all the camera mount units.

Part Number	Part Description	Weight	Print File
47003	Canopy, Mobius Mini	29g	47003.STL
47004	Canopy, Mobius Mini, FPV Cut-out	29g	47004.STL
47005	Canopy, Mobius/Runcam	29g	47005.STL
47006	Canopy, Mobius/Runcam, FPV Cut-out	29g	47006.STL
52003	Canopy support, front	9g	52003.STL
52004	Canopy support, rear	4g	52004.STL
52005	Canopy support, rib	4g	52005.STL

Install

Use E6000, Beacons FoamTac or UHU-POR glue to fasten in place.

Print Recomendations

ABS is recommended for this part. It will fit and work fine on 0.2mm resolution and slow to moderate print speed.