Mini Talon Noses2
March, 2017
Introduction
This article is my final on the subject of the Mini Talon front canopy. I have redone the feature set that makes up this 3D model smoothing out the surface and profile and changing the NACA style vent to side air scoop type vents. It prints more cleanly now and I have added a version which will support either the Geared Pan & Tilt or the 390deg Pan & Tilt. Below you will find the latest versions of this fun design with downloads for all the printable STL files.
Plain Canopy
If you want to simply cover the nose for a more appealing look or need something to fit to your own structure this may be the part you want.
|
| Image | Part Number | Part Description | Weight | Print File |
|
47001 | Canopy, Plain | 29g | 47001.STL |
|
52001 | Canopy support, front | 9g | 52001.STL |
|
52002 | Canopy support, rear | 4g | 52002.STL |
|
52004 | Optional HS1177 Camera Mount | 4g | 52004.STL |
|
52005 | Optional HS1184 Camera Mount | 4g | 52005.STL |
Install
- Use E6000, Beacons FoamTac or UHU-POR glue to fasten front support and rear catch in place.
Print Recomendations
- ABS is recommended for this part. It will fit and work fine on 0.2mm resolution and slow to moderate print speed.
Static Camera Mounts
This version has a cut-out and platform for the Mobius style HD cams and is the most aerodynamic of all the camera mount units.
|
| Image | Part Number | Part Description | Weight | Print File |
| File:47003T.JPG | 47003 | Canopy, Mobius Mini | 29g | 47003.STL |
| File:47005T.JPG | 47005 | Canopy, Mobius/Runcam | 29g | 47005.STL |
| File:54002.JPG | 54002 | Front deck plate | TBA | 54002.STL |
| File:54001.JPG | 54001 | Rear deck plate | TBA | 54001.STL |
| File:52006.JPG | 52006 | Canopy support, rib | 4g | 52006.STL |
| File:52007.JPG | 52007 | Camera mount plate | 4g | 52007.STL |
| File:52004.JPG | 52004 | Optional HS1177 Camera Mount | 4g | 52004.STL |
| File:52005.JPG | 52005 | Optional HS1184 Camera Mount | 4g | 52005.STL |
Install
- Use E6000, Beacons FoamTac or UHU-POR glue to fasten front and rear decks and ribs in place.
Print Recomendations
- ABS is recommended for this part. It will fit and work fine on 0.2mm resolution and slow to moderate print speed.
