3D Parts
From ItsQv
January 2017
Contents
GENERAL PARTS
Aeronaut Folding Propeller Stop Insert
Release - May 2016
These inserts fit into a bare Aeronaut aluminum folding propeller yoke, also know as the "Center Piece". They are designed to be used in a pusher prop set-up and will effectively stop the blades from over crossing and over extending.
|
| Part Number | Part Description | Yoke Size | Drawing | Print File |
| 10001 | Propeller stop insert, 38mm x 5mm | 38mm | 10001.PDF | 10001.STL |
| 10002 | Propeller stop insert, 38mm x 6mm | 38mm | - | 10002.STL |
| 10003 | Propeller stop insert, 38mm x 8mm | 38mm | - | 10003.STL |
| 10004 | Propeller stop insert, 42mm x 5mm | 42mm | - | 10004.STL |
| 10005 | Propeller stop insert, 42mm x 6mm | 42mm | - | 10005.STL |
| 10006 | Propeller stop insert, 42mm x 8mm | 42mm | - | 10006.STL |
Print Recomendations
ABS is best as it is UV tolerant. They fit and work fine on 0.2mm resolution and moderate print speed.
See Also
- Project pages - How To - Set-Up a Pusher Style Folding Prop
Antenna SMA Connector Wrench
Release - March, 2016
This is used to loosen or tighten an SMA connector nut that is burried and difficult to get to with a standard wrench or pliers. It is like a flare nut wrench in that you can fit it oveer the coax and slide it down to engage the nut.
|
| Part Number | Part Description | Drawing | Print File |
| 10012 | Thumb "flare-nut" wrench for SMA antenna connectors | - | 10012.STL |
Print Recomendations
- PLA works well for this part. They fit and work fine on 0.2mm resolution and moderate print speed.
See Also
- Project pages - None
