Difference between revisions of "Brushless Roll Gimbal"
From ItsQv
(→Print Parts) |
(→Print Parts) |
||
| Line 56: | Line 56: | ||
| align="Left" | Roll Mount Upright | | align="Left" | Roll Mount Upright | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52083.STL 52083.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52083.STL 52083.STL] | ||
| − | | align="Left" | | + | | align="Left" | 52083_Sketch |
| align="Left" | Fits canopies for Mini Talon and Stratosurfer. See part sketch for mount hole spacing. | | align="Left" | Fits canopies for Mini Talon and Stratosurfer. See part sketch for mount hole spacing. | ||
|- | |- | ||
| Line 63: | Line 63: | ||
| align="Left" | Motor mount, 16mm | | align="Left" | Motor mount, 16mm | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52013.STL 52013.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52013.STL 52013.STL] | ||
| − | | align="Left" | | + | | align="Left" | 52013_Sketch |
| align="Left" | Fits motors with 16mm bolt circle | | align="Left" | Fits motors with 16mm bolt circle | ||
|- | |- | ||
| Line 70: | Line 70: | ||
| align="Left" | Motor mount, 12mm | | align="Left" | Motor mount, 12mm | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52187.STL 52187.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52187.STL 52187.STL] | ||
| − | | align="Left" | | + | | align="Left" | 52187_Sketch |
| align="Left" | Fits motors with 12mm bolt circle | | align="Left" | Fits motors with 12mm bolt circle | ||
|- | |- | ||
| Line 77: | Line 77: | ||
| align="Left" | Camera plate | | align="Left" | Camera plate | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52011.STL 52011.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52011.STL 52011.STL] | ||
| − | | align="Left" | | + | | align="Left" | 52011_Sketch |
| align="Left" | Supports Mobius, Mini Mobius, RunCam, Runcam Split, etc. | | align="Left" | Supports Mobius, Mini Mobius, RunCam, Runcam Split, etc. | ||
|- | |- | ||
| Line 84: | Line 84: | ||
| align="Left" | Upright brace, long | | align="Left" | Upright brace, long | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/10036.STL 10036.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/10036.STL 10036.STL] | ||
| − | | align="Left" | | + | | align="Left" | 10036_Sketch |
| align="Left" | Fits Mini Talon rear mount canopy | | align="Left" | Fits Mini Talon rear mount canopy | ||
|- | |- | ||
| Line 90: | Line 90: | ||
| align="Left" | '''10037''' | | align="Left" | '''10037''' | ||
| align="Left" | Upright brace, Short | | align="Left" | Upright brace, Short | ||
| − | | align="Center" | [http://www.itsqv.com/QVM/files/parts/10037.STL | + | | align="Center" | [http://www.itsqv.com/QVM/files/parts/ 10037.STL 19937.STL] |
| − | | align="Left" | | + | | align="Left" | 10037_Sketch |
| align="Left" | Fits Mini Talon front mount canopy | | align="Left" | Fits Mini Talon front mount canopy | ||
|- | |- | ||
| Line 98: | Line 98: | ||
| align="Left" | Upright brace, Stratosurfer | | align="Left" | Upright brace, Stratosurfer | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/10038.STL 10038.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/10038.STL 10038.STL] | ||
| − | | align="Left" | | + | | align="Left" | 10038_Sketch |
| align="Left" | Fits Stratosurfer long LP canopy | | align="Left" | Fits Stratosurfer long LP canopy | ||
|- | |- | ||
| Line 105: | Line 105: | ||
| align="Left" | Upright tilt plate, 4 degree | | align="Left" | Upright tilt plate, 4 degree | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52184.STL 52184.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52184.STL 52184.STL] | ||
| − | | align="Left" | | + | | align="Left" | 52184_Sketch |
| align="Left" | Fits all 4-bolt canopy mounts | | align="Left" | Fits all 4-bolt canopy mounts | ||
|} | |} | ||
Revision as of 22:43, 26 November 2018
© Mark Qvale - November, 2018
| |
Introduction
In this catalog of parts are components needed to make a brushless single axis roll gimbal. There are notes on compatibility and some pieces with sketches for more information. This roll gimbal fits both my Mini Talon & Stratosurfer canopies as well as any other flat plate mount.
Print Parts
| Image | Part Number | Part Description | Print File | Drawing | Compatibility |
|
52083 | Roll Mount Upright | 52083.STL | 52083_Sketch | Fits canopies for Mini Talon and Stratosurfer. See part sketch for mount hole spacing. |
|
52013 | Motor mount, 16mm | 52013.STL | 52013_Sketch | Fits motors with 16mm bolt circle |
|
52187 | Motor mount, 12mm | 52187.STL | 52187_Sketch | Fits motors with 12mm bolt circle |
|
52011 | Camera plate | 52011.STL | 52011_Sketch | Supports Mobius, Mini Mobius, RunCam, Runcam Split, etc. |
|
10036 | Upright brace, long | 10036.STL | 10036_Sketch | Fits Mini Talon rear mount canopy |
|
10037 | Upright brace, Short | 10037.STL 19937.STL | 10037_Sketch | Fits Mini Talon front mount canopy |
|
10038 | Upright brace, Stratosurfer | 10038.STL | 10038_Sketch | Fits Stratosurfer long LP canopy |
|
52184 | Upright tilt plate, 4 degree | 52184.STL | 52184_Sketch | Fits all 4-bolt canopy mounts |
Typical Assemblies
Details
|
Mini Talon Forward Mount
|
Stratosurfer Low Profile Mount
|
See Also
Comments? Questions?
