Difference between revisions of "Mini Talon Noses2"

From ItsQv
Jump to: navigation, search
(→‎Static Camera Mounts)
Line 120: Line 120:
 
| align="Center" | 4g
 
| align="Center" | 4g
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52007.STL 52007.STL]
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52007.STL 52007.STL]
 +
|-
 +
| align="Left" | [[File:52004.jpg]]
 +
| align="Left" | '''52004'''
 +
| align="Left" | Optional HS1177 Camera Mount
 +
| align="Center" | 4g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52004.STL 52004.STL]
 +
|-
 +
| align="Left" | [[File:52005.jpg]]
 +
| align="Left" | '''52005'''
 +
| align="Left" | Optional HS1184 Camera Mount
 +
| align="Center" | 4g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52005.STL 52005.STL]
 +
|}
 +
{{Clear1}}
 +
 +
'''Install'''
 +
 +
: Use E6000, Beacons FoamTac or UHU-POR glue to fasten front and rear decks and ribs in place.
 +
<br>
 +
 +
'''Print Recomendations'''
 +
 +
: ABS is recommended for this part. It will fit and work fine on 0.2mm resolution and slow to moderate print speed.
 +
<br>
 +
----
 +
=== Brushless Roll Attachment === This version has a cut-out and platform to add a brushless gimbal roll attachment. The version shown here uses a small 22mm BGC motor, a Multistar 1806/XXXX.<br><br>
 +
 +
{| border="0" cellspacing="1" cellpadding="1" align="center"
 +
|-
 +
| align="center" | [[File:1003.jpg|1000px]]
 +
|}
 +
<br><br>
 +
 +
{| border="1" cellspacing="1" cellpadding="1" align="left"
 +
|-
 +
| width="200" align="Left" | '''Image'''
 +
| width="100" align="Left" | '''Part Number'''
 +
| width="400" align="Left" | '''Part Description'''
 +
| width="100" align="Center" | '''Weight'''
 +
| width="100" align="Center" | '''Print File'''
 +
|-
 +
| align="Left" | [[File:47013T.jpg]]
 +
| align="Left" | '''47013'''
 +
| align="Left" | Canopy, Roll attachment
 +
| align="Center" | 29g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/47013.STL 47013.STL]
 +
|-
 +
| align="Left" | [[File:54002.jpg]]
 +
| align="Left" | '''54002'''
 +
| align="Left" | Front deck plate
 +
| align="Center" | TBA
 +
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/54002.STL 54002.STL]
 +
|-
 +
| align="Left" | [[File:54001.jpg]]
 +
| align="Left" | '''54001'''
 +
| align="Left" | Rear deck plate
 +
| align="Center" | TBA
 +
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/54001.STL 54001.STL]
 +
|-
 +
| align="Left" | [[File:52006.jpg]]
 +
| align="Left" | '''52006'''
 +
| align="Left" | Canopy support, rib
 +
| align="Center" | 4g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52006.STL 52006.STL]
 +
|-
 +
| align="Left" | [[File:52011.jpg]]
 +
| align="Left" | '''52011'''
 +
| align="Left" | Roll attachment camera plate
 +
| align="Center" | 29g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52011.STL 52011.STL]
 +
|-
 +
| align="Left" | [[File:52013.jpg]]
 +
| align="Left" | '''52013'''
 +
| align="Left" | Roll attachment end plate
 +
| align="Center" | TBA
 +
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52013.STL 52013.STL]
 +
|-
 +
| align="Left" | [[File:52012.jpg]]
 +
| align="Left" | '''52012'''
 +
| align="Left" | Roll attachment motor stand
 +
| align="Center" | TBA
 +
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52012.STL 52012.STL]
 
|-
 
|-
 
| align="Left" | [[File:52004.jpg]]
 
| align="Left" | [[File:52004.jpg]]

Revision as of 13:36, 28 March 2017

March, 2017

Introduction

This article is my final on the subject of the Mini Talon front canopy. I have redone the feature set that makes up this 3D model smoothing out the surface and profile and changing the NACA style vent to side air scoop type vents. It prints more cleanly now and I have added a version which will support either the Geared Pan & Tilt or the 390deg Pan & Tilt. Below you will find the latest versions of this fun design with downloads for all the printable STL files.

Plain Canopy

If you want to simply cover the nose for a more appealing look or need something to fit to your own structure this may be the part you want.

1001.jpg



Image Part Number Part Description Weight Print File
47001T.jpg 47001 Canopy, Plain 29g 47001.STL
52001.jpg 52001 Canopy support, front 9g 52001.STL
52002.jpg 52002 Canopy support, rear 4g 52002.STL
52004.jpg 52004 Optional HS1177 Camera Mount 4g 52004.STL
52005.jpg 52005 Optional HS1184 Camera Mount 4g 52005.STL


Install

Use E6000, Beacons FoamTac or UHU-POR glue to fasten front support and rear catch in place.


Print Recomendations

ABS is recommended for this part. It will fit and work fine on 0.2mm resolution and slow to moderate print speed.



Static Camera Mounts

This version has a cut-out and platform for the Mobius style HD cams and is the most aerodynamic of all the camera mount units.

47003.JPG



Image Part Number Part Description Weight Print File
47003T.jpg 47003 Canopy, Mobius Mini 29g 47003.STL
47005T.jpg 47005 Canopy, Mobius/Runcam 29g 47005.STL
54002.jpg 54002 Front deck plate TBA 54002.STL
54001.jpg 54001 Rear deck plate TBA 54001.STL
52006.jpg 52006 Canopy support, rib 4g 52006.STL
52007.jpg 52007 Camera mount plate 4g 52007.STL
52004.jpg 52004 Optional HS1177 Camera Mount 4g 52004.STL
52005.jpg 52005 Optional HS1184 Camera Mount 4g 52005.STL


Install

Use E6000, Beacons FoamTac or UHU-POR glue to fasten front and rear decks and ribs in place.


Print Recomendations

ABS is recommended for this part. It will fit and work fine on 0.2mm resolution and slow to moderate print speed.


=== Brushless Roll Attachment === This version has a cut-out and platform to add a brushless gimbal roll attachment. The version shown here uses a small 22mm BGC motor, a Multistar 1806/XXXX.

1003.jpg



Image Part Number Part Description Weight Print File
File:47013T.jpg 47013 Canopy, Roll attachment 29g 47013.STL
54002.jpg 54002 Front deck plate TBA 54002.STL
54001.jpg 54001 Rear deck plate TBA 54001.STL
52006.jpg 52006 Canopy support, rib 4g 52006.STL
52011.jpg 52011 Roll attachment camera plate 29g 52011.STL
52013.jpg 52013 Roll attachment end plate TBA 52013.STL
52012.jpg 52012 Roll attachment motor stand TBA 52012.STL
52004.jpg 52004 Optional HS1177 Camera Mount 4g 52004.STL
52005.jpg 52005 Optional HS1184 Camera Mount 4g 52005.STL


Install

Use E6000, Beacons FoamTac or UHU-POR glue to fasten front and rear decks and ribs in place.


Print Recomendations

ABS is recommended for this part. It will fit and work fine on 0.2mm resolution and slow to moderate print speed.


Retrieved from "http://www.itsqv.com/QVM/index.php?title=Mini_Talon_Noses2&oldid=2775"