Difference between revisions of "Mini Talon Noses2"

From ItsQv
Jump to: navigation, search
(→‎Static Canopy for HD Cameras)
Line 18: Line 18:
 
{| border="1" cellspacing="1" cellpadding="1" align="left"
 
{| border="1" cellspacing="1" cellpadding="1" align="left"
 
|-
 
|-
 +
| width="200" align="Left" | '''Image'''
 
| width="100" align="Left" | '''Part Number'''
 
| width="100" align="Left" | '''Part Number'''
 
| width="400" align="Left" | '''Part Description'''
 
| width="400" align="Left" | '''Part Description'''
Line 23: Line 24:
 
| width="100" align="Center" | '''Print File'''
 
| width="100" align="Center" | '''Print File'''
 
|-
 
|-
 +
| align="Left" | File:47001T.JPG
 
| align="Left" | '''47001'''
 
| align="Left" | '''47001'''
 
| align="Left" | Canopy, Plain
 
| align="Left" | Canopy, Plain
Line 28: Line 30:
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/47001.STL 47001.STL]
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/47001.STL 47001.STL]
 
|-
 
|-
−
| align="Left" | '''47002'''
+
| align="Left" | File:52001.JPG
−
| align="Left" | Canopy, Plain, FPV Cut-out
+
−
| align="Center" | 29g
+
−
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/47002.STL 47002.STL]
+
−
|-
+
 
| align="Left" | '''52001'''
 
| align="Left" | '''52001'''
 
| align="Left" | Canopy support, front
 
| align="Left" | Canopy support, front
Line 38: Line 36:
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52001.STL 52001.STL]
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52001.STL 52001.STL]
 
|-
 
|-
 +
| align="Left" | File:52002.JPG
 
| align="Left" | '''52002'''
 
| align="Left" | '''52002'''
 
| align="Left" | Canopy support, rear
 
| align="Left" | Canopy support, rear
 
| align="Center" | 4g
 
| align="Center" | 4g
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52002.STL 52002.STL]
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52002.STL 52002.STL]
 +
|-
 +
| align="Left" | File:52004.JPG
 +
| align="Left" | '''52004'''
 +
| align="Left" | Optional HS1177 Camera Mount
 +
| align="Center" | 4g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52004.STL 52004.STL]
 +
|-
 +
| align="Left" | File:52005.JPG
 +
| align="Left" | '''52005'''
 +
| align="Left" | Optional HS1184 Camera Mount
 +
| align="Center" | 4g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52005.STL 52005.STL]
 
|}
 
|}
 
{{Clear1}}
 
{{Clear1}}
Line 47: Line 58:
 
'''Install'''
 
'''Install'''
  
−
: Use E6000, Beacons FoamTac or UHU-POR glue to fasten in place.
+
: Use E6000, Beacons FoamTac or UHU-POR glue to fasten front support and rear catch in place.
 
<br>
 
<br>
  
Line 56: Line 67:
 
----
 
----
  
−
=== Static Canopy for HD Cameras ===
+
=== Static Camera Mounts ===
  
 
This version has a cut-out and platform for the Mobius style HD cams and is the most aerodynamic of all the camera mount units.<br><br>
 
This version has a cut-out and platform for the Mobius style HD cams and is the most aerodynamic of all the camera mount units.<br><br>
Line 68: Line 79:
 
{| border="1" cellspacing="1" cellpadding="1" align="left"
 
{| border="1" cellspacing="1" cellpadding="1" align="left"
 
|-
 
|-
 +
| width="200" align="Left" | '''Image'''
 
| width="100" align="Left" | '''Part Number'''
 
| width="100" align="Left" | '''Part Number'''
 
| width="400" align="Left" | '''Part Description'''
 
| width="400" align="Left" | '''Part Description'''
Line 73: Line 85:
 
| width="100" align="Center" | '''Print File'''
 
| width="100" align="Center" | '''Print File'''
 
|-
 
|-
 +
| align="Left" | File:47003T.JPG
 
| align="Left" | '''47003'''
 
| align="Left" | '''47003'''
 
| align="Left" | Canopy, Mobius Mini
 
| align="Left" | Canopy, Mobius Mini
Line 78: Line 91:
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/47003.STL 47003.STL]
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/47003.STL 47003.STL]
 
|-
 
|-
−
| align="Left" | '''47004'''
+
| align="Left" | File:47005T.JPG
−
| align="Left" | Canopy, Mobius Mini, FPV Cut-out
+
−
| align="Center" | 29g
+
−
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/47004.STL 47004.STL]
+
−
|-
+
 
| align="Left" | '''47005'''
 
| align="Left" | '''47005'''
 
| align="Left" | Canopy, Mobius/Runcam
 
| align="Left" | Canopy, Mobius/Runcam
Line 88: Line 97:
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/47005.STL 47005.STL]
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/47005.STL 47005.STL]
 
|-
 
|-
−
| align="Left" | '''47006'''
+
| align="Left" | File:54002.JPG
−
| align="Left" | Canopy, Mobius/Runcam, FPV Cut-out
+
| align="Left" | '''54002'''
−
| align="Center" | 29g
+
| align="Left" | Front deck plate
−
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/47006.STL 47006.STL]
+
| align="Center" | TBA
 +
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/54002.STL 54002.STL]
 
|-
 
|-
−
| align="Left" | '''52003'''
+
| align="Left" | File:54001.JPG
−
| align="Left" | Canopy support, front
+
| align="Left" | '''54001'''
−
| align="Center" | 9g
+
| align="Left" | Rear deck plate
−
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52003.STL 52003.STL]
+
| align="Center" | TBA
 +
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/54001.STL 54001.STL]
 
|-
 
|-
 +
| align="Left" | File:52006.JPG
 +
| align="Left" | '''52006'''
 +
| align="Left" | Canopy support, rib
 +
| align="Center" | 4g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52006.STL 52006.STL]
 +
|-
 +
| align="Left" | File:52007.JPG
 +
| align="Left" | '''52007'''
 +
| align="Left" | Camera mount plate
 +
| align="Center" | 4g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52007.STL 52007.STL]
 +
|-
 +
| align="Left" | File:52004.JPG
 
| align="Left" | '''52004'''
 
| align="Left" | '''52004'''
−
| align="Left" | Canopy support, rear
+
| align="Left" | Optional HS1177 Camera Mount
 
| align="Center" | 4g
 
| align="Center" | 4g
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52004.STL 52004.STL]
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52004.STL 52004.STL]
 
|-
 
|-
 +
| align="Left" | File:52005.JPG
 
| align="Left" | '''52005'''
 
| align="Left" | '''52005'''
−
| align="Left" | Canopy support, rib
+
| align="Left" | Optional HS1184 Camera Mount
 
| align="Center" | 4g
 
| align="Center" | 4g
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52005.STL 52005.STL]
 
| align="Center" | [http://www.itsqv.com/QVM/files/canopy/52005.STL 52005.STL]
Line 112: Line 137:
 
'''Install'''
 
'''Install'''
  
−
: Use E6000, Beacons FoamTac or UHU-POR glue to fasten in place.
+
: Use E6000, Beacons FoamTac or UHU-POR glue to fasten front and rear decks and ribs in place.
 
<br>
 
<br>
  

Revision as of 12:45, 28 March 2017

March, 2017

Introduction

This article is my final on the subject of the Mini Talon front canopy. I have redone the feature set that makes up this 3D model smoothing out the surface and profile and changing the NACA style vent to side air scoop type vents. It prints more cleanly now and I have added a version which will support either the Geared Pan & Tilt or the 390deg Pan & Tilt. Below you will find the latest versions of this fun design with downloads for all the printable STL files.

Plain Canopy

If you want to simply cover the nose for a more appealing look or need something to fit to your own structure this may be the part you want.

47001.JPG



Image Part Number Part Description Weight Print File
File:47001T.JPG 47001 Canopy, Plain 29g 47001.STL
File:52001.JPG 52001 Canopy support, front 9g 52001.STL
File:52002.JPG 52002 Canopy support, rear 4g 52002.STL
File:52004.JPG 52004 Optional HS1177 Camera Mount 4g 52004.STL
File:52005.JPG 52005 Optional HS1184 Camera Mount 4g 52005.STL


Install

Use E6000, Beacons FoamTac or UHU-POR glue to fasten front support and rear catch in place.


Print Recomendations

ABS is recommended for this part. It will fit and work fine on 0.2mm resolution and slow to moderate print speed.



Static Camera Mounts

This version has a cut-out and platform for the Mobius style HD cams and is the most aerodynamic of all the camera mount units.

47003.JPG



Image Part Number Part Description Weight Print File
File:47003T.JPG 47003 Canopy, Mobius Mini 29g 47003.STL
File:47005T.JPG 47005 Canopy, Mobius/Runcam 29g 47005.STL
File:54002.JPG 54002 Front deck plate TBA 54002.STL
File:54001.JPG 54001 Rear deck plate TBA 54001.STL
File:52006.JPG 52006 Canopy support, rib 4g 52006.STL
File:52007.JPG 52007 Camera mount plate 4g 52007.STL
File:52004.JPG 52004 Optional HS1177 Camera Mount 4g 52004.STL
File:52005.JPG 52005 Optional HS1184 Camera Mount 4g 52005.STL


Install

Use E6000, Beacons FoamTac or UHU-POR glue to fasten front and rear decks and ribs in place.


Print Recomendations

ABS is recommended for this part. It will fit and work fine on 0.2mm resolution and slow to moderate print speed.


Retrieved from "http://www.itsqv.com/QVM/index.php?title=Mini_Talon_Noses2&oldid=2753"