Difference between revisions of "3D Parts"
From ItsQv
(→Aeronaut Folding Propeller Stop Insert) |
(→Aeronaut Folding Propeller Stop Insert) |
||
| Line 65: | Line 65: | ||
| − | '''Print Recomendations''' | + | '''Print Recomendations'''<br> |
| − | ABS is best as it is UV tolerant. They fit and work fine on 0.2mm resolution and moderate speed. | + | |
| − | <br> | + | ABS is best as it is UV tolerant. They fit and work fine on 0.2mm resolution and moderate print speed. |
| + | <br><br> | ||
'''See Also''' | '''See Also''' | ||
Revision as of 14:30, 22 March 2017
January 2017
Contents
GENERAL PARTS
Aeronaut Folding Propeller Stop Insert
Release - May 2016
These inserts fit into a bare Aeronaut aluminum folding propeller yoke, also know as the "Center Piece". They are designed to be used in a pusher prop set-up and will effectively stop the blades from over crossing and over extending.
|
| Part Number | Part Description | Yoke Size | Drawing | Print File |
| 10001 | Propeller stop insert, 38mm x 5mm | 38mm | 10001.PDF | 10001.STL |
| 10002 | Propeller stop insert, 38mm x 6mm | 38mm | - | 10002.STL |
| 10003 | Propeller stop insert, 38mm x 8mm | 38mm | - | 10003.STL |
| 10004 | Propeller stop insert, 42mm x 5mm | 42mm | - | 10004.STL |
| 10005 | Propeller stop insert, 42mm x 6mm | 42mm | - | 10005.STL |
| 10006 | Propeller stop insert, 42mm x 8mm | 42mm | - | 10006.STL |
Print Recomendations
ABS is best as it is UV tolerant. They fit and work fine on 0.2mm resolution and moderate print speed.
See Also
- Project pages - How To - Set-Up a Pusher Style Folding Prop
Antenna SMA Connector Wrench
