Difference between revisions of "Collapsible Bungee Tow Hook"

Revision as of 20:35, 19 October 2016

Introduction

After breaking a few tow hooks on my EPO Foam FPV planes, I came up with this collapsible tow hook. It requires a rectangular hole be burned (use a soldering iron) in the foam about 1/3 the distance from the wing spar to the nose. Then glue it in with Beacons FoamTac. Here are the parts:

Printed Parts

Tow_Hook_Base_v3.STL

Hardware

8mm x 5mm x 31mm Aluminum Tube M3 x 20mm Button Head Screw M3 Hex Nut

You can find the aluminum tube material at a local hobby store. Then follow the picture on drilling and shaping the tube befor assembly.

Print Files

• http://www.thingiverse.com/thing:1767778/#files