Difference between revisions of "RunCam Split Camera Case"

From ItsQv
Jump to: navigation, search
(Project 3D Print Files)
(Print Parts)
Line 47: Line 47:
 
| align="Left" |  '''52067'''
 
| align="Left" |  '''52067'''
 
| align="Left" |  RunCam Split PCB Top Cover
 
| align="Left" |  RunCam Split PCB Top Cover
| align="Left" |  6g
+
| align="Left" |  4.3g
 
| align="Center" |  [http://www.itsqv.com/QVM/files/parts/52067.STL 52067.STL]
 
| align="Center" |  [http://www.itsqv.com/QVM/files/parts/52067.STL 52067.STL]
 
| align="Left" |  52067_Sketch
 
| align="Left" |  52067_Sketch
Line 55: Line 55:
 
| align="Left" |  '''52076'''
 
| align="Left" |  '''52076'''
 
| align="Left" |  RunCam Split SD Card Snap Cover
 
| align="Left" |  RunCam Split SD Card Snap Cover
| align="Left" |  6g
+
| align="Left" |  0.7g
 
| align="Center" |  [http://www.itsqv.com/QVM/files/parts/52076.STL 52076.STL]
 
| align="Center" |  [http://www.itsqv.com/QVM/files/parts/52076.STL 52076.STL]
 
| align="Left" |  52076_Sketch
 
| align="Left" |  52076_Sketch
Line 63: Line 63:
 
| align="Left" |  '''52086'''
 
| align="Left" |  '''52086'''
 
| align="Left" |  RunCam Split PCB Cover Bottom, Extended Mount
 
| align="Left" |  RunCam Split PCB Cover Bottom, Extended Mount
| align="Left" |  6g
+
| align="Left" |  4.6g
 
| align="Center" |  [http://www.itsqv.com/QVM/files/parts/52086.STL 52086.STL]
 
| align="Center" |  [http://www.itsqv.com/QVM/files/parts/52086.STL 52086.STL]
 
| align="Left" |  52086_Sketch
 
| align="Left" |  52086_Sketch
Line 71: Line 71:
 
| align="Left" |  '''52087'''
 
| align="Left" |  '''52087'''
 
| align="Left" |  RunCam Split PCB Cover Bottom, Integrated Mount
 
| align="Left" |  RunCam Split PCB Cover Bottom, Integrated Mount
| align="Left" |  7g
+
| align="Left" |  4.5g
 
| align="Center" |  [http://www.itsqv.com/QVM/files/parts/52087.STL 52087.STL]
 
| align="Center" |  [http://www.itsqv.com/QVM/files/parts/52087.STL 52087.STL]
 
| align="Left" |  52087_Sketch
 
| align="Left" |  52087_Sketch
Line 79: Line 79:
 
| align="Left" |  '''52088'''
 
| align="Left" |  '''52088'''
 
| align="Left" |  RunCam Split PCB Cover Bottom, Standard Mount
 
| align="Left" |  RunCam Split PCB Cover Bottom, Standard Mount
| align="Left" |  7g
+
| align="Left" |  3.1g
 
| align="Center" |  [http://www.itsqv.com/QVM/files/parts/52088.STL 52088.STL]
 
| align="Center" |  [http://www.itsqv.com/QVM/files/parts/52088.STL 52088.STL]
 
| align="Left" |  52088_Sketch
 
| align="Left" |  52088_Sketch

Revision as of 12:48, 2 December 2017

© Mark Qvale - November, 2017

RCSplit Case.jpg
   


Introduction

After picking up a Runcam Split camera I decided to create a case so that I can easily move the camera from plane to plane. This article then shows three versions of this case. It includes a snap on/off cover over the SD Card to make it easy to access and an internal guard around the microphone to cut down on wind noise.

Versions

The three versions are shown below. They all use the same top cover.

Cover Assemblies.jpg



You will need to have an M3 tap to set-up the top and bottom.

Case DWG.JPG



Print Parts

 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
52067sm.JPG  52067  RunCam Split PCB Top Cover  4.3g  52067.STL  52067_Sketch  Fits RunCam Split V1
52076sm.JPG  52076  RunCam Split SD Card Snap Cover  0.7g  52076.STL  52076_Sketch  Fits 52067 Cover.
52086sm.JPG  52086  RunCam Split PCB Cover Bottom, Extended Mount  4.6g  52086.STL  52086_Sketch  Fits RunCam Split V1
52087sm.JPG  52087  RunCam Split PCB Cover Bottom, Integrated Mount  4.5g  52087.STL  52087_Sketch  Fits RunCam Split V1
52088sm.JPG  52088  RunCam Split PCB Cover Bottom, Standard Mount  3.1g  52088.STL  52088_Sketch  Fits RunCam Split V1




See Also

TBA


Project 3D Print Files

This project can also be found on Thingiverse - RunCam Split Simple Case & Mount

Comments? Questions?

<u>email me!