Difference between revisions of "Collapsible Bungee Tow Hook"
From ItsQv
| Line 4: | Line 4: | ||
{| cellspacing="1" cellpadding="1" width="95%" border="0" | {| cellspacing="1" cellpadding="1" width="95%" border="0" | ||
|- | |- | ||
| − | | align="left" valign="bottom" width=" | + | | align="left" valign="bottom" width="30%" | __TOC__ |
| − | | align="right" width=" | + | | align="right" width="70%" | [[File:Hook.jpg|600px]] |
|} | |} | ||
Revision as of 00:45, 26 October 2016
August 2014
|
Introduction
After breaking a few tow hooks on my EPO Foam FPV planes, I came up with this collapsible tow hook. It requires a rectangular hole be burned (use a soldering iron) in the foam about 1/3 the distance from the wing spar to the nose. Then glue it in with Beacons FoamTac. Here are the parts:
Printed Parts
Tow_Hook_Base_v3.STL
Hardware
8mm x 5mm x 31mm Aluminum Tube M3 x 20mm Button Head Screw M3 Hex Nut
You can find the aluminum tube material at a local hobby store. Then follow the picture on drilling and shaping the tube befor assembly.
Print Files
