Difference between revisions of "Forward Offset Pan & Tilt"
From ItsQv
(→Introduction) |
(→See Also) |
||
| Line 81: | Line 81: | ||
== See Also == | == See Also == | ||
| − | [[Simple Centered Pan & Tilt]] | + | :* [[Simple Centered Pan & Tilt]] |
| + | :* [[RunCam Split Dedicated Pan and Tilt]] | ||
<br><br><br> | <br><br><br> | ||
[[Category:Contents]] | [[Category:Contents]] | ||
Latest revision as of 13:38, 18 March 2018
February 2016
| |
| Simple 9g Servo Pan & Tilt |
Introduction
After building the Simple Pan & Tilt gimbal I saw that it would be nice to get some forward shift as the camera tilted down. So, I took the models from that small project and modified them to get some forward shift. With the addition of a linkage, this set-up is not as "solid" as the centered version but it seems to work OK.
|
| Tilt movement |
Printed Parts
|
| Base servo plate |
|
| Lower 'U' bracket |
|
| Camera Plate |
Parts List
Servos & Hardware
- 2ea 9 gram x 2Kg Servos, 1 modified for 180 degree travel
- 4ea M2x6 socket head cap screws
- 4ea M2 flat washers
- 4ea #1 x 1/8" flat head sheet metal screws
- Align PJ Gel Pad (optional)
- Small wire ties
3D Prints
- Camera Mount Plate - PnT2_Camera_Plate_v01
- Yaw Bracket - PnT2_Lower_Bracket_v01
- Yaw Servo Mount Plate - PnT_Servo_Bracket
Tools needed
- 1.5mm ball end driver (allen wrench)
- Phillips head screwdriver
- 2mm tap and tap drill
Camera
- Mobius with lens '2C' modified for vertical mount
Files
Here are the print files if you would like to give this a try. The zip contains the printable pieces and image files, simply richt-click the link and select "Save Target" for the download. If you would like the native SolidWorks files, please drop me a line (below) and I will accomodate.
Mobius Offset Pan and Tilt v2 ZIP
Comments? Questions?
See Also
