Difference between revisions of "Forward Offset Pan & Tilt"
From ItsQv
(→Introduction) |
(→Files) |
||
| Line 62: | Line 62: | ||
Here are the print files if you would like to give this a try. The zip contains the printable pieces and image files, simply richt-click the link and select "Save Target" for the download. If you would like the native SolidWorks files, please drop me a line (below) and I will accomodate.<br><br> | Here are the print files if you would like to give this a try. The zip contains the printable pieces and image files, simply richt-click the link and select "Save Target" for the download. If you would like the native SolidWorks files, please drop me a line (below) and I will accomodate.<br><br> | ||
| − | [http://www.itsqv.com/share/ | + | [http://www.itsqv.com/share/Mobius_Offset_Pan_and_Tilt_v2.zip Mobius Offset Pan and Tilt v2 ZIP] |
<br><br> | <br><br> | ||
Revision as of 11:28, 18 March 2016
|
This page or section is under construction and will change going forward.
Questions or Comments? Please contact the Wiki administrator |
February 2016
| |
| Simple 9g Servo Pan & Tilt |
Introduction
|
| Base servo plate |
|
| Lower 'U' bracket |
|
| Camera Plate |
Parts List
Servos & Hardware
- 2ea 9 gram x 2Kg Servos, 1 modified for 180 degree travel
- 4ea M2x6 socket head cap screws
- 4ea M2 flat washers
- 4ea #1 x 1/8" flat head sheet metal screws
- Align PJ Gel Pad (optional)
- Small wire ties
3D Prints
- Camera Mount Plate - PnT2_Camera_Plate_v01
- Yaw Bracket - PnT2_Lower_Bracket_v01
- Yaw Servo Mount Plate - PnT_Servo_Bracket
Tools needed
- 1.5mm ball end driver (allen wrench)
- Phillips head screwdriver
- 2mm tap and tap drill
Camera
- Mobius with lens '2C' modified for vertical mount
Files
Here are the print files if you would like to give this a try. The zip contains the printable pieces and image files, simply richt-click the link and select "Save Target" for the download. If you would like the native SolidWorks files, please drop me a line (below) and I will accomodate.
Mobius Offset Pan and Tilt v2 ZIP
Comments? Questions?
See Also
Forward Offset Pan & Tilt
