Difference between revisions of "Collapsible Bungee Tow Hook"
From ItsQv
(Created page with "== Introduction ==") |
(→Hardware) |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | [[File:BTI.png|link=GIMBALS|Gimbals]]<br> | ||
| + | <i>August 2014</i><br> | ||
| + | <br> | ||
| + | {| cellspacing="1" cellpadding="1" width="95%" border="0" | ||
| + | |- | ||
| + | | align="left" valign="bottom" width="30%" | __TOC__ | ||
| + | | align="center" width="70%" | [[File:Hook.jpg|600px]] | ||
| + | |} | ||
| + | |||
== Introduction == | == Introduction == | ||
| + | |||
| + | After breaking a few tow hooks on my EPO Foam FPV planes, I came up with this collapsible tow hook. It requires a rectangular hole be burned (use a soldering iron) in the foam about 1/3 the distance from the wing spar to the nose. Then glue it in with Beacons FoamTac. Here are the parts: | ||
| + | |||
| + | === Printed Parts === | ||
| + | Tow_Hook_Base_v3.STL | ||
| + | |||
| + | === Hardware === | ||
| + | : 8mm x 5mm x 31mm Aluminum Tube | ||
| + | : M3 x 20mm Button Head Screw | ||
| + | : M3 Hex Nut | ||
| + | |||
| + | You can find the aluminum tube material at a local hobby store. Then follow the picture on drilling and shaping the tube before assembly. | ||
| + | |||
| + | == Print Files == | ||
| + | |||
| + | :* http://www.thingiverse.com/thing:1767778/#files | ||
| + | |||
| + | <br><br><br> | ||
| + | [[Category:Contents]] | ||
Latest revision as of 00:47, 26 October 2016
August 2014
|
Introduction
After breaking a few tow hooks on my EPO Foam FPV planes, I came up with this collapsible tow hook. It requires a rectangular hole be burned (use a soldering iron) in the foam about 1/3 the distance from the wing spar to the nose. Then glue it in with Beacons FoamTac. Here are the parts:
Printed Parts
Tow_Hook_Base_v3.STL
Hardware
- 8mm x 5mm x 31mm Aluminum Tube
- M3 x 20mm Button Head Screw
- M3 Hex Nut
You can find the aluminum tube material at a local hobby store. Then follow the picture on drilling and shaping the tube before assembly.
Print Files
