Difference between revisions of "TEST 0132"

From ItsQv
Jump to: navigation, search
(→‎Video Test)
(→‎Full Length Low Profile Canopies)
 
(14 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
== Video Test ==
+
 
−
=== First ===
+
== Intro ==
 
<br>
 
<br>
  
−
<plainhtml>
+
[[File:cc_image.png|20px]]<i><small> Mark Qvale - March, 2020</small></i><br>
−
<table align="center" width="900" border="0"><tr><td align="center">
+
 
−
<iframe width="853" height="488" src="source goes here" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
+
=== Full Length Low Profile Canopies ===
−
</td></tr></table>
+
<br>
−
</plainhtml>
+
{| border="0" cellspacing="1" cellpadding="1" align="center"
 +
|-
 +
| align="center" | [[File:LPC01.JPG|600px]]
 +
|-
 +
| align="center" | Two piece swoopiness!
 +
|}
 
<br><br>
 
<br><br>
 +
 +
Below are the parts to put together a one-piece full length canopy or a two-piece full length canopy (shown above). There is also a short list of a few Pan & Tilt parts to fit the PnT mount shown. If you elect to go with the full length, one piece canopy, you will need the ability to print quality, large parts on a print bed of 200mm x 200mm minimum. These canopies work with the tall, printed single motor set-up or the twin motor set-up.<br><br>
 +
 +
{| border="0" cellspacing="1" cellpadding="1" align="center"
 +
|-
 +
| align="center" | [[File:LPC03.JPG|900px]]
 +
|}
 +
<br>
 +
 +
<!--{| border="0" cellspacing="1" cellpadding="1" align="center"
 +
|-
 +
| align="center" | [[File:LPC05.JPG|600px]]
 +
|}<br><br>-->
 +
 +
All parts shown below have been test printed in PLA at .2mm resolution and weights shown are estimates.
 +
 +
{| border="1" cellspacing="1" cellpadding="1" align="left" width=95%
 +
|-
 +
| width="200" align="Left" | &nbsp;'''Image'''
 +
| width="75" align="Center" | '''Part Number'''
 +
| width="280" align="Left" | &nbsp;'''Part Description'''
 +
| width="75" align="Left" | &nbsp;'''Weight'''
 +
| width="75" align="Center" | '''Print File'''
 +
| align="Left" | &nbsp;'''Compatibility Notes'''
 +
|-
 +
| align="Left" | [[File:52238sm.JPG]]
 +
| align="Left" | &nbsp;'''52238'''
 +
| align="Left" | Full Length, Low Profile Canopy, Plain
 +
| align="Left" | &nbsp;64g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52238.STL 52238.STL]
 +
| align="Left" | &nbsp;Needs 52246 Low Profile Front Wing Mount, Latching (below)
 +
|-
 +
| align="Left" | [[File:52239sm.JPG]]
 +
| align="Left" | &nbsp;'''52239'''
 +
| align="Left" | Full Length, Low Profile Canopy, for PnT
 +
| align="Left" | &nbsp;67g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52239.STL 52239.STL]
 +
| align="Left" | &nbsp;Needs 52246 Low Profile Front Wing Mount, Latching (below)
 +
|-
 +
| align="Left" | [[File:52240sm.JPG]]
 +
| align="Left" | &nbsp;'''52240'''
 +
| align="Left" | Full Length, 2PC Front Low Profile, Plain
 +
| align="Left" | &nbsp;42g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52240.STL 52240.STL]
 +
| align="Left" | &nbsp;Plain front section. Cut-to-fit your camera(s)
 +
|-
 +
| align="Left" | [[File:52241sm.JPG]]
 +
| align="Left" | &nbsp;'''52241'''
 +
| align="Left" | Full Length, 2PC Front Low Profile, PnT
 +
| align="Left" | &nbsp;44g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52241.STL 52241.STL]
 +
| align="Left" | &nbsp;Front section with PnT 4 bolt mount
 +
|-
 +
| align="Left" | [[File:52242sm.JPG]]
 +
| align="Left" | &nbsp;'''52242'''
 +
| align="Left" | Full Length, 2PC Rear Low Profile Canopy
 +
| align="Left" | &nbsp;28g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52242.STL 52242.STL]
 +
| align="Left" | &nbsp;Fits both front sections, 52240 & 52241
 +
|-
 +
| align="Left" | [[File:52243sm.JPG]]
 +
| align="Left" | &nbsp;'''52243'''
 +
| align="Left" | Full Length, Low Profile Canopy, Front Mount
 +
| align="Left" | &nbsp;2.5g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52124.STL 52243.STL]
 +
| align="Left" | &nbsp;Front mount for the 52238, 52239, 52240 & 52241 canopies
 +
|-
 +
| align="Left" | [[File:52244sm.JPG]]
 +
| align="Left" | &nbsp;'''52244'''
 +
| align="Left" | Full Length, Low Profile Canopy, Front Mount Nut Plate
 +
| align="Left" | &nbsp;1.8g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52244.STL 52244.STL]
 +
| align="Left" | &nbsp;Nut plate for front mount piece
 +
|-
 +
| align="Left" | [[File:52245sm.JPG]]
 +
| align="Left" | &nbsp;'''52245'''
 +
| align="Left" | Low Profile Front Wing Mount, Plain
 +
| align="Left" | &nbsp;15g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52125.STL 52245.STL]
 +
| align="Left" | &nbsp;For use with the 2 piece canopy (no latch)
 +
|-
 +
| align="Left" | [[File:52246sm.JPG]]
 +
| align="Left" | &nbsp;'''52246'''
 +
| align="Left" | Low Profile Front Wing Mount, Latching
 +
| align="Left" | &nbsp;15g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52246.STL 52246.STL]
 +
| align="Left" | &nbsp;Can be used for either 1 piece or 2 piece canopies
 +
|-
 +
| align="Left" | [[File:52247sm.JPG]]
 +
| align="Left" | &nbsp;'''52247'''
 +
| align="Left" | Glue-In VTx mount
 +
| align="Left" | &nbsp;7g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52247.STL 52247.STL]
 +
| align="Left" | &nbsp;See Mount Drawing for position information
 +
|}
 +
{{Clear1}}
 +
 +
{| border="0" cellspacing="1" cellpadding="1" align="center"
 +
|-
 +
| align="center" | [[File:LPC07.JPG|900px]]
 +
|}<br><br>
 +
  
 
[[Category:Marks]]
 
[[Category:Marks]]

Latest revision as of 17:52, 29 July 2020

Intro


Cc image.png Mark Qvale - March, 2020

Full Length Low Profile Canopies


LPC01.JPG
Two piece swoopiness!



Below are the parts to put together a one-piece full length canopy or a two-piece full length canopy (shown above). There is also a short list of a few Pan & Tilt parts to fit the PnT mount shown. If you elect to go with the full length, one piece canopy, you will need the ability to print quality, large parts on a print bed of 200mm x 200mm minimum. These canopies work with the tall, printed single motor set-up or the twin motor set-up.

LPC03.JPG



All parts shown below have been test printed in PLA at .2mm resolution and weights shown are estimates.

 Image Part Number  Part Description  Weight Print File  Compatibility Notes
52238sm.JPG  52238 Full Length, Low Profile Canopy, Plain  64g 52238.STL  Needs 52246 Low Profile Front Wing Mount, Latching (below)
52239sm.JPG  52239 Full Length, Low Profile Canopy, for PnT  67g 52239.STL  Needs 52246 Low Profile Front Wing Mount, Latching (below)
52240sm.JPG  52240 Full Length, 2PC Front Low Profile, Plain  42g 52240.STL  Plain front section. Cut-to-fit your camera(s)
52241sm.JPG  52241 Full Length, 2PC Front Low Profile, PnT  44g 52241.STL  Front section with PnT 4 bolt mount
52242sm.JPG  52242 Full Length, 2PC Rear Low Profile Canopy  28g 52242.STL  Fits both front sections, 52240 & 52241
52243sm.JPG  52243 Full Length, Low Profile Canopy, Front Mount  2.5g 52243.STL  Front mount for the 52238, 52239, 52240 & 52241 canopies
52244sm.JPG  52244 Full Length, Low Profile Canopy, Front Mount Nut Plate  1.8g 52244.STL  Nut plate for front mount piece
52245sm.JPG  52245 Low Profile Front Wing Mount, Plain  15g 52245.STL  For use with the 2 piece canopy (no latch)
52246sm.JPG  52246 Low Profile Front Wing Mount, Latching  15g 52246.STL  Can be used for either 1 piece or 2 piece canopies
52247sm.JPG  52247 Glue-In VTx mount  7g 52247.STL  See Mount Drawing for position information


LPC07.JPG


Retrieved from "http://www.itsqv.com/QVM/index.php?title=TEST_0132&oldid=6064"