Difference between revisions of "TEST 0132"

From ItsQv
Jump to: navigation, search
(→‎First)
Line 1: Line 1:
 
== Video Test ==
 
== Video Test ==
−
=== First ===
+
== First ==
 
<br>
 
<br>
  
 
[[File:cc_image.png|20px]]<i><small> Mark Qvale - March, 2020</small></i><br>
 
[[File:cc_image.png|20px]]<i><small> Mark Qvale - March, 2020</small></i><br>
 +
 +
=== Full Length Low Profile Canopies ===
 +
 +
{| border="0" cellspacing="1" cellpadding="1" align="center"
 +
|-
 +
| align="center" | [[File:LPC01.JPG|600px]]
 +
|}
 +
<br><br>
 +
 +
If you have the ability to print quality large parts and you have a print bed of 200mm x 200mm with print height of 170mm minimum, you can have the nicest, most aerodynamic canopy setup. These canopies work with the tall, printed single motor set-up or the twin motor set-up.<br><br>
 +
 +
All parts were test printed in PLA at .2mm resolution. Weights shown are estimates
 +
 +
{| border="0" cellspacing="1" cellpadding="1" align="center"
 +
|-
 +
| align="center" | [[File:LPC03.JPG|600px]]
 +
|}
 +
<br>
 +
 +
{| border="0" cellspacing="1" cellpadding="1" align="center"
 +
|-
 +
| align="center" | [[File:LPC05.JPG|600px]]
 +
|}<br><br>
 +
 +
{| border="1" cellspacing="1" cellpadding="1" align="left" width=95%
 +
|-
 +
| width="200" align="Left" | &nbsp;'''Image'''
 +
| width="75" align="Center" | '''Part Number'''
 +
| width="230" align="Left" | &nbsp;'''Part Description'''
 +
| width="75" align="Left" | &nbsp;'''Weight'''
 +
| width="75" align="Center" | '''Print File'''
 +
| align="Left" | &nbsp;'''Compatibility Notes'''
 +
|-
 +
| align="Left" | [[File:52238sm.JPG]]
 +
| align="Left" | '''52238'''
 +
| align="Left" | Full Length, Low Profile Canopy, Plain
 +
| align="Left" | &nbsp;64g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52238.STL 52238.STL]
 +
| align="Left" | &nbsp;Needs 52246 Low Profile Front Wing Mount, Latching (below)
 +
|-
 +
| align="Left" | [[File:52239sm.JPG]]
 +
| align="Left" | '''52239'''
 +
| align="Left" | Full Length, Low Profile Canopy, for PnT
 +
| align="Left" | &nbsp;67g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52239.STL 52239.STL]
 +
| align="Left" | &nbsp;Needs 52246 Low Profile Front Wing Mount, Latching (below)
 +
|-
 +
| align="Left" | [[File:52240sm.jpg]]
 +
| align="Left" | '''52240'''
 +
| align="Left" | Full Length, 2PC Front Low Profile, Plain
 +
| align="Left" | &nbsp;42g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52240.STL 52240.STL]
 +
| align="Left" | &nbsp;Plain front section. Cut-to-fit your camera(s)
 +
|-
 +
| align="Left" | [[File:52241sm.JPG]]
 +
| align="Left" | '''52241'''
 +
| align="Left" | Full Length, 2PC Front Low Profile, PnT
 +
| align="Left" | &nbsp;44g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52241.STL 52241.STL]
 +
| align="Left" | &nbsp;Front section with PnT 4 bolt mount
 +
|-
 +
| align="Left" | [[File:52242sm.JPG]]
 +
| align="Left" | '''52242'''
 +
| align="Left" | Full Length, 2PC Rear Low Profile Canopy
 +
| align="Left" | &nbsp;28g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52242.STL 52242.STL]
 +
| align="Left" | &nbsp;Fits both front sections, 52240 & 52241
 +
|-
 +
| align="Left" | [[File:52243sm.jpg]]
 +
| align="Left" | '''52243'''
 +
| align="Left" | Full Length, Low Profile Canopy, Front Mount
 +
| align="Left" | &nbsp;2.5g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52124.STL 52243.STL]
 +
| align="Left" | &nbsp;Front mount for the 52238, 52239, 52240 & 52241 canopies
 +
|-
 +
| align="Left" | [[File:52244sm.JPG]]
 +
| align="Left" | '''52244'''
 +
| align="Left" | Full Length, Low Profile Canopy, Front Mount Nut Plate
 +
| align="Left" | &nbsp;1.8g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52244.STL 52244.STL]
 +
| align="Left" | &nbsp;Nut plate for front mount piece
 +
|-
 +
| align="Left" | [[File:52245sm.jpg]]
 +
| align="Left" | '''52245'''
 +
| align="Left" | Low Profile Front Wing Mount, Plain
 +
| align="Left" | &nbsp;15g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52125.STL 52245.STL]
 +
| align="Left" | &nbsp;For use with the 2 piece canopy (no latch)
 +
|-
 +
| align="Left" | [[File:52246sm.JPG]]
 +
| align="Left" | '''52246'''52243_
 +
| align="Left" | Low Profile Front Wing Mount, Latching
 +
| align="Left" | &nbsp;15g
 +
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52246.STL 52246.STL]
 +
| align="Left" | &nbsp;Can be used for either 1 piece or 2 piece canopies
 +
|}
 +
{{Clear1}}
  
 
[[Category:Marks]]
 
[[Category:Marks]]

Revision as of 20:59, 28 July 2020

Video Test

First


Cc image.png Mark Qvale - March, 2020

Full Length Low Profile Canopies

LPC01.JPG



If you have the ability to print quality large parts and you have a print bed of 200mm x 200mm with print height of 170mm minimum, you can have the nicest, most aerodynamic canopy setup. These canopies work with the tall, printed single motor set-up or the twin motor set-up.

All parts were test printed in PLA at .2mm resolution. Weights shown are estimates

LPC03.JPG


600px


 Image Part Number  Part Description  Weight Print File  Compatibility Notes
52238sm.JPG 52238 Full Length, Low Profile Canopy, Plain  64g 52238.STL  Needs 52246 Low Profile Front Wing Mount, Latching (below)
52239sm.JPG 52239 Full Length, Low Profile Canopy, for PnT  67g 52239.STL  Needs 52246 Low Profile Front Wing Mount, Latching (below)
File:52240sm.jpg 52240 Full Length, 2PC Front Low Profile, Plain  42g 52240.STL  Plain front section. Cut-to-fit your camera(s)
52241sm.JPG 52241 Full Length, 2PC Front Low Profile, PnT  44g 52241.STL  Front section with PnT 4 bolt mount
52242sm.JPG 52242 Full Length, 2PC Rear Low Profile Canopy  28g 52242.STL  Fits both front sections, 52240 & 52241
File:52243sm.jpg 52243 Full Length, Low Profile Canopy, Front Mount  2.5g 52243.STL  Front mount for the 52238, 52239, 52240 & 52241 canopies
52244sm.JPG 52244 Full Length, Low Profile Canopy, Front Mount Nut Plate  1.8g 52244.STL  Nut plate for front mount piece
File:52245sm.jpg 52245 Low Profile Front Wing Mount, Plain  15g 52245.STL  For use with the 2 piece canopy (no latch)
52246sm.JPG 5224652243_ Low Profile Front Wing Mount, Latching  15g 52246.STL  Can be used for either 1 piece or 2 piece canopies


Retrieved from "http://www.itsqv.com/QVM/index.php?title=TEST_0132&oldid=6048"