Difference between revisions of "Pan and Tilt Parts"

From ItsQv
Jump to: navigation, search
(→‎Simple Pan and Tilt)
(Replaced content with "#REDIRECT Parts_Catalog_-_Pan_and_Tilt_Parts Category:Parts")
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
{{UnderConst}}
+
#REDIRECT [[Parts_Catalog_-_Pan_and_Tilt_Parts]]
  
−
<!--[[File:BTI.png|link=GIMBALS|Gimbals]]<br>-->
+
[[Category:Parts]]
−
<i>October 2017</i><br>
+
−
<br>
+
−
{| cellspacing="1" cellpadding="1" width="95%" border="0"
+
−
|-
+
−
| align="left" valign="bottom" width="50%" | __TOC__
+
−
| align="right" width="50%" | [[File:LWPT03.JPG|700px]]
+
−
|-
+
−
| &nbsp;
+
−
| &nbsp;
+
−
|}<br>
+
−
 
+
−
 
+
−
== Introduction ==
+
−
 
+
−
This catalog of parts is a compilation of 3D printed parts that can be combined to make many versions of my Pan and Tilts. There are notes on compatibility and some pieces with sketches or more information.<br><br>
+
−
 
+
−
=== Project Pages ===
+
−
 
+
−
You can check these pages for more information on some of my builds.<br>
+
−
 
+
−
<i>In this Wiki</i><br>
+
−
:*[[Simple Centered Pan & Tilt]]
+
−
:*[[Forward Offset Pan & Tilt]]
+
−
:*[[Heavy Duty Pan and Tilt]]
+
−
:*[[Lightweight Pan and Tilt]]
+
−
:*[[390 Degree Geared Pan and Tilt]]<br><br>
+
−
 
+
−
<i>Thingiverse</i><br>
+
−
:*[https://www.thingiverse.com/thing:2168825 Lightweight Pan & Tilt v2]
+
−
:*[https://www.thingiverse.com/thing:2122735 Lightweight Pan & Tilt]
+
−
:*[https://www.thingiverse.com/thing:1821872 Heavy Duty Pan & Tilt]
+
−
:*[https://www.thingiverse.com/thing:1658134 Mobius Simple Compact Pan and Tilt]
+
−
:*[https://www.thingiverse.com/thing:1658131 Mobius Simple Offset Pan and Tilt]<br><br>
+
−
 
+
−
== Print Parts ==
+
−
=== Yaw Brackets ===
+
−
 
+
−
{| border="1" cellspacing="1" cellpadding="1" align="left" width=95%
+
−
|-
+
−
| width="201" align="Left" | &nbsp;'''Image'''
+
−
| width="75" align="Center" | '''Part Number'''
+
−
| width="230" align="Left" | &nbsp;'''Part Description'''
+
−
| width="100" align="Center" | '''Print File'''
+
−
| width="100" align="Center" | '''Drawing'''
+
−
| align="Left" | &nbsp;'''Compatibility'''
+
−
|-
+
−
| align="Left" | [[File:52092sm.JPG]]
+
−
| align="Left" | &nbsp;'''52092'''
+
−
| align="Left" | &nbsp;Lower bracket, small
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52092.STL 52092.STL]
+
−
| align="Left" | &nbsp;[http://www.itsqv.com/QVM/images/5/51/52092_Sketch.JPG 52092_Sketch]
+
−
| align="Left" | &nbsp;Supports all Camera Plates. See part sketch for mount hole spacing.
+
−
|-
+
−
| align="Left" | [[File:52093sm.JPG]]
+
−
| align="Left" | &nbsp;'''52093'''
+
−
| align="Left" | &nbsp;Lower bracket, medium
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52093.STL 52093.STL]
+
−
| align="Left" | &nbsp;[http://www.itsqv.com/QVM/images/0/06/52093_Sketch.JPG 52092_Sketch]
+
−
| align="Left" | &nbsp;Supports all Camera Plates. See part sketch for mount hole spacing.
+
−
|-
+
−
| align="Left" | [[File:52094sm.JPG]]
+
−
| align="Left" | &nbsp;'''52094'''
+
−
| align="Left" | &nbsp;Lower bracket, large
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52094.STL 52094.STL]
+
−
| align="Left" | &nbsp;[http://www.itsqv.com/QVM/images/c/c9/52094_Sketch.JPG 52092_Sketch]
+
−
| align="Left" | &nbsp;Supports all Camera Plates. See part sketch for mount hole spacing.
+
−
|}
+
−
{{Clear1}}
+
−
 
+
−
=== Camera Plates ===
+
−
 
+
−
{| border="1" cellspacing="1" cellpadding="1" align="left" width=95%
+
−
|-
+
−
| width="190" align="Left" | &nbsp;'''Image'''
+
−
| width="75" align="Center" | '''Part Number'''
+
−
| width="230" align="Left" | &nbsp;'''Part Description'''
+
−
| width="100" align="Center" | '''Print File'''
+
−
| width="100" align="Center" | '''Drawing'''
+
−
| align="Left" | &nbsp;'''Compatibility'''
+
−
|-
+
−
| align="Left" | [[File:52062sm.JPG]]
+
−
| align="Left" | &nbsp;'''52062'''
+
−
| align="Left" | &nbsp;Camera plate, RunCam Split
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52062.STL 52062.STL]
+
−
| align="Left" | &nbsp;52062_Sketch
+
−
| align="Left" | &nbsp;Fits all Yaw Brackets. Designed for the RunCam Split camera
+
−
|-
+
−
| align="Left" | [[File:52089sm.JPG]]
+
−
| align="Left" | &nbsp;'''52089'''
+
−
| align="Left" | &nbsp;Camera plate, HS1177
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52089.STL 52089.STL]
+
−
| align="Left" | &nbsp;52089_Sketch
+
−
| align="Left" | &nbsp;Fits all Yaw Brackets. Designed for the HS1177, 26mm x 26mm camera
+
−
|-
+
−
| align="Left" | [[File:52090sm.JPG]]
+
−
| align="Left" | &nbsp;'''52090'''
+
−
| align="Left" | &nbsp;Camera plate, RunCam Eagle v1
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52090.STL 52090.STL]
+
−
| align="Left" | &nbsp;52090_Sketch
+
−
| align="Left" | &nbsp;Fits all Yaw Brackets. Designed for the RunCam Eagle v1 camera
+
−
|-
+
−
| align="Left" | [[File:52091sm.JPG]]
+
−
| align="Left" | &nbsp;'''52091'''
+
−
| align="Left" | &nbsp;Camera plate, RunCam Eagle v2
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52091.STL 52091.STL]
+
−
| align="Left" | &nbsp;52091_Sketch
+
−
| align="Left" | &nbsp;Fits all Yaw Brackets. Designed for the RunCam eagle v2 camera
+
−
|-
+
−
| align="Left" | [[File:52095sm.JPG]]
+
−
| align="Left" | &nbsp;'''52095'''
+
−
| align="Left" | &nbsp;Camera plate, standard
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52095.STL 52095.STL]
+
−
| align="Left" | &nbsp;52095_Sketch
+
−
| align="Left" | &nbsp;Fits all Yaw Brackets. Simple HD camera platform for Runcam2, Mobius, Foxeer Legend, etc.
+
−
|-
+
−
| align="Left" | [[File:52096sm.JPG]]
+
−
| align="Left" | &nbsp;'''52096'''
+
−
| align="Left" | &nbsp;Camera plate, 18mm mini
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52096.STL 52096.STL]
+
−
| align="Left" | &nbsp;52096_Sketch
+
−
| align="Left" | &nbsp;Fits all Yaw Brackets. Designed to fit mini FPV cam by Eachine, etc.
+
−
|-
+
−
| align="Left" | [[File:52097sm.JPG]]
+
−
| align="Left" | &nbsp;'''52097'''
+
−
| align="Left" | &nbsp;Camera plate, 21mm mini
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52097.STL 52097.STL]
+
−
| align="Left" | &nbsp;52097_Sketch
+
−
| align="Left" | &nbsp;Fits all Yaw Brackets. Designed to fit mini FPV cam by FatShark, etc.
+
−
|}
+
−
{{Clear1}}
+
−
 
+
−
=== Servo Plates ===
+
−
 
+
−
{| border="1" cellspacing="1" cellpadding="1" align="left" width=95%
+
−
|-
+
−
| width="190" align="Left" | &nbsp;'''Image'''
+
−
| width="75" align="Center" | '''Part Number'''
+
−
| width="230" align="Left" | &nbsp;'''Part Description'''
+
−
| width="100" align="Center" | '''Print File'''
+
−
| width="100" align="Center" | '''Drawing'''
+
−
| align="Left" | &nbsp;'''Compatibility'''
+
−
|-
+
−
| align="Left" | [[File:52063sm.JPG]]
+
−
| align="Left" | &nbsp;'''52063'''
+
−
| align="Left" | &nbsp;Servo plate, geared, raised
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52063.STL 52063.STL]
+
−
| align="Left" | &nbsp;52063_Sketch
+
−
| align="Left" | &nbsp;Fits Turnigy RS5180MG servo or similar.
+
−
|-
+
−
| align="Left" | [[File:52098sm.JPG]]
+
−
| align="Left" | &nbsp;'''52098'''
+
−
| align="Left" | &nbsp;Servo plate, geared, flat
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52098.STL 52098.STL]
+
−
| align="Left" | &nbsp;52098_Sketch
+
−
| align="Left" | &nbsp;Fits Turnigy RS5180MG servo or similar.
+
−
|-
+
−
| align="Left" | [[File:52099sm.JPG]]
+
−
| align="Left" | &nbsp;'''52099'''
+
−
| align="Left" | &nbsp;Servo plate, angled
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52099.STL 52099.STL]
+
−
| align="Left" | &nbsp;52099_Sketch
+
−
| align="Left" | &nbsp;Fits Turnigy RS5180MG servo or similar. Servo only, no gearing.
+
−
|-
+
−
| align="Left" | [[File:52100sm.JPG]]
+
−
| align="Left" | &nbsp;'''52100'''
+
−
| align="Left" | &nbsp;Servo plate, flat, raised
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52100.STL 52100.STL]
+
−
| align="Left" | &nbsp;52100_Sketch
+
−
| align="Left" | &nbsp;Fits Turnigy RS5180MG servo or similar. Servo only, no gearing.
+
−
|-
+
−
| align="Left" | [[File:52111sm.JPG]]
+
−
| align="Left" | &nbsp;'''52111'''
+
−
| align="Left" | &nbsp;Servo plate, HD PnT, large
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52111.STL 52111.STL]
+
−
| align="Left" | &nbsp;52111_Sketch
+
−
| align="Left" | &nbsp;Fits GWS S125-1T 360 deg servo or similar.
+
−
|-
+
−
| align="Left" | [[File:52112sm.JPG]]
+
−
| align="Left" | &nbsp;'''52112'''
+
−
| align="Left" | &nbsp;Servo plate, HD PnT, small
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52112.STL 52112.STL]
+
−
| align="Left" | &nbsp;52112_Sketch
+
−
| align="Left" | &nbsp;Fits GWS S125-1T 360 deg servo or similar.
+
−
|-
+
−
| align="Left" | [[File:52116sm.JPG]]
+
−
| align="Left" | &nbsp;'''52116'''
+
−
| align="Left" | &nbsp;Deck plate, HD PnT
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52116.STL 52116.STL]
+
−
| align="Left" | &nbsp;52116_Sketch
+
−
| align="Left" | &nbsp;Replaces the bearing plate on the HD set-up. Allows a clean deck mount with the servo below.
+
−
|}
+
−
{{Clear1}}
+
−
 
+
−
=== Assembly Parts ===
+
−
 
+
−
{| border="1" cellspacing="1" cellpadding="1" align="left" width=95%
+
−
|-
+
−
| width="190" align="Left" | &nbsp;'''Image'''
+
−
| width="75" align="Center" | '''Part Number'''
+
−
| width="230" align="Left" | &nbsp;'''Part Description'''
+
−
| width="100" align="Center" | '''Print File'''
+
−
| width="100" align="Center" | '''Drawing'''
+
−
| align="Left" | &nbsp;'''Compatibility'''
+
−
|-
+
−
| align="Left" | [[File:2205sm.JPG]]
+
−
| align="Left" | &nbsp;'''2205'''
+
−
| align="Left" | &nbsp;Bearing plate, HD-PnT
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/2205.STL 2205.STL]
+
−
| align="Left" | &nbsp;2205_Sketch
+
−
| align="Left" | &nbsp;Carries and supports the 0.375"ID x 0.625"OD x 0.156"T bearing.
+
−
|-
+
−
| align="Left" | [[File:52064sm.jpg]]
+
−
| align="Left" | &nbsp;'''52064'''
+
−
| align="Left" | &nbsp;Light weight PnT deck spacer, 5mm
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52064.STL 52064.STL]
+
−
| align="Left" | &nbsp;52064_Sketch
+
−
| align="Left" | &nbsp;Supports all non-HD servo plates.
+
−
|-
+
−
| align="Left" | [[File:52080sm.JPG]]
+
−
| align="Left" | &nbsp;'''52080'''
+
−
| align="Left" | &nbsp;Pan turret, HD-PnT, short
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52080.STL 52080.STL]
+
−
| align="Left" | &nbsp;52080_Sketch
+
−
| align="Left" | &nbsp;Creates a simple Pan only on the HD unit.
+
−
|-
+
−
| align="Left" | [[File:52082sm.JPG]]
+
−
| align="Left" | &nbsp;'''52082'''
+
−
| align="Left" | &nbsp;Servo coupler, HD-PnT
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52082.STL 52082.STL]
+
−
| align="Left" | &nbsp;52082_Sketch
+
−
| align="Left" | &nbsp;Connects GWS servo to Yaw plate assembly or simple cam plate.
+
−
|-
+
−
| align="Left" | [[File:52109sm.JPG]]
+
−
| align="Left" | &nbsp;'''52109'''
+
−
| align="Left" | &nbsp;Upper yaw bracket coupler
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52109.STL 52109.STL]
+
−
| align="Left" | &nbsp;52109_Sketch
+
−
| align="Left" | &nbsp;Attaches to 52094, Yaw bracket to make assembly.
+
−
|-
+
−
| align="Left" | [[File:52113sm.JPG]]
+
−
| align="Left" | &nbsp;'''52113'''
+
−
| align="Left" | &nbsp;Cam plate, geared PnT, 4 degree
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52113.STL 52113.STL]
+
−
| align="Left" | &nbsp;52113_Sketch
+
−
| align="Left" | &nbsp;Replaces tilt parts on geared PnT. Makes a "Pan only" set-up.
+
−
|-
+
−
| align="Left" | [[File:52114sm.JPG]]
+
−
| align="Left" | &nbsp;'''52114'''
+
−
| align="Left" | &nbsp;Pinion gear mount, geared PnT
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52114.STL 52114.STL]
+
−
| align="Left" | &nbsp;52114_Sketch
+
−
| align="Left" | &nbsp;Main component of geared pinion assembly.
+
−
|-
+
−
| align="Left" | [[File:52115sm.JPG]]
+
−
| align="Left" | &nbsp;'''52115'''
+
−
| align="Left" | &nbsp;Pan turret, HD-PnT, tall, 4 degree
+
−
| align="Center" | &nbsp;[http://www.itsqv.com/QVM/files/parts/52115.STL 52115.STL]
+
−
| align="Left" | &nbsp;52115_Sketch
+
−
| align="Left" | &nbsp;Creates a simple Pan only camera deck on the HD unit. This deck is angled to 4 degrees.
+
−
|}
+
−
{{Clear1}}
+
−
 
+
−
== Typical Assemblies ==
+
−
 
+
−
=== Simple Pan and Tilt ===
+
−
 
+
−
{| cellspacing="1" cellpadding="1" align="center" border="0"
+
−
|-
+
−
| align="center" | [[File:PnT81.JPG|400px]]&nbsp;[[File:PnT82.JPG|400px]]
+
−
|}
+
−
 
+
−
=== Heavy Duty Pan and Tilt ===
+
−
 
+
−
{| cellspacing="1" cellpadding="1" align="center" border="0"
+
−
|-
+
−
| align="center" | [[File:PnT83.JPG|400px]]
+
−
|}<br>
+
−
 
+
−
{| cellspacing="1" cellpadding="1" align="center" border="0"
+
−
|-
+
−
| align="center" | [[File:PnT84.JPG|400px]]
+
−
|}<br><br>
+
−
 
+
−
== See Also ==
+
−
 
+
−
TBA
+
−
 
+
−
 
+
−
<br><br><br>
+
−
[[Category:Contents]]
+

Latest revision as of 00:03, 22 October 2017

Redirect to:

Retrieved from "http://www.itsqv.com/QVM/index.php?title=Pan_and_Tilt_Parts&oldid=3386"