Difference between revisions of "Collapsible Bungee Tow Hook"
From ItsQv
(→Print Files) |
|||
| Line 1: | Line 1: | ||
| + | [[File:BTI.png|link=GIMBALS|Gimbals]]<br> | ||
| + | <i>August 2014</i><br> | ||
| + | <br> | ||
| + | {| cellspacing="1" cellpadding="1" width="95%" border="0" | ||
| + | |- | ||
| + | | align="left" valign="bottom" width="50%" | __TOC__ | ||
| + | | align="right" width="50%" | [[File:Hook.jpg|600px]] | ||
| + | |} | ||
| + | |||
== Introduction == | == Introduction == | ||
Revision as of 20:38, 19 October 2016
August 2014
|
Introduction
After breaking a few tow hooks on my EPO Foam FPV planes, I came up with this collapsible tow hook. It requires a rectangular hole be burned (use a soldering iron) in the foam about 1/3 the distance from the wing spar to the nose. Then glue it in with Beacons FoamTac. Here are the parts:
Printed Parts
Tow_Hook_Base_v3.STL
Hardware
8mm x 5mm x 31mm Aluminum Tube M3 x 20mm Button Head Screw M3 Hex Nut
You can find the aluminum tube material at a local hobby store. Then follow the picture on drilling and shaping the tube befor assembly.
Print Files
