View source for Motrofly 2610-1100 Outrunner

[[File:BTI.png|link=Motor_Testing_Index|Motors]]<br>
<i>March 2011</i><br><br>

'''Drive System Information and Test Results'''<br>
Catalogue Information<br>[http://www.subsonicplanes.com/Motrolfly_Motors.html Supplier Site] 

[[File:Mf2610.jpg|center]]<br> 

=== <br>Test Results  ===

Test results are done "On the bench" using the Medusa Research Power Analyser Pro data acquisition module with a bench mounted test stand. Run times vary depending on the power range and motor type. Data sampling either follows a ramp up to full (100%) power or a step and hold function at 0, 25, 50, 75 &amp; 100% Throttle. System power is provided by a common flight battery pack and is used, without re-charge, for several tests. All summary results are "best case" average or stable at the given measure.<br><br> 

[[File:Mf2610graph.png|center]]<br>

=== '''Data Values'''  ===

Chart represents collected data on two Slow Fly APC propellers. 

[[File:Mf2610table.png|center]]<br>

As tested weight - 94.2 grams<br>
Includes X mount, shaft collar and prop adapter with prop nut and washer.<br><br>
Tested Kv - 982 RPM/v<br>
RPM Value at 10.0 volts<br><br>


[[Category:Motors]]