View source for Turnigy SK3530-1400

[[File:BTI.png|link=Motor_Testing_Index|Motors]]<br>
<i>July 2009</i><br>
'''Drive System Information and Test Results'''<br>
Catalogue Information<br>[http://www.hobbycity.com Supplier Site] 

[[File:SK3530cat.png|center]]<br> 

=== <br>Test Results  ===

Test results are done "On the bench" using the Medusa Research Power Analyser Pro data acquisition module with a bench mounted test stand. Run times vary depending on the power range and motor type. Data sampling either follows a ramp up to full (100%) power or a step and hold function at 0, 25, 50, 75 &amp; 100% Throttle. System power is provided by a common flight battery pack and is used, without re-charge, for several tests. All summary results are "best case" average or stable at the given measure. 

[[File:SK3530data.png|center]]<br> 

<br> 

=== '''Data Chart'''  ===

Chart represents collected data on the 14 x 7 APCe propeller. 

[[File:SK3530chart.png|center]]<br>

[[Category:Motors]]